1. The decorative material of the condensate on the surface of the putty wall is a thick paste coating, which is a necessary product before painting. It is applied to the primer or directly to the object to eliminate the irregularity of the surface. It is prepared with a small amount of paint base material, a large amount of filler, and a sufficient amount of colored pigment.
2. When the absorption of the base layer is relatively strong, it is necessary to use primer for sealing when scraping putty to avoid excessive absorption of the putty adhesive, which can affect the adhesion of the putty. It is necessary to master the tilt angle of the tool to scrape off the wall putty, and apply uniform force to ensure the fullness of the putty.
3. To avoid excessive shrinkage of the putty, which can cause cracks and peeling, the first scraping should not be too thick. Depending on the characteristics of the putty, the thickness of the putty should be 0.5-1 millimeters. It is best not to scratch too much to prevent it from curling and falling.
4. Based on the performance of the scratch layer and the condition of the base layer, suitable putty and scraping tools can be selected to fill the holes and cracks in the base layer with a scraper. During operation, press the blade with your index finger and then press the putty onto the wall. In the defect, ensure that it is filled, then scrape putty around it to minimize the traces of putty.
This article is dedicated by Jinan Putty Powder. For more information, please click: http://www.hszy8818.cn Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned